VICTREX AM™ 200 is a high-performance PAEK polymer that has been designed for extrusion-based 3D printing from the ground up. It belongs to the same family of materials as PEEK but has way stronger interlayer bonds due to slower crystallization rate. This is why parts 3D printed with VICTREX AM™ 200 have very low anisotropy with Z-axis tensile strength exceeding 60% of the tensile strength measured in the X/Y direction. The material is thermally stable with melting temperature of 304 °C and glass transition temperature of 156 °C.

Annealed parts 3D printed with VICTREX AM™ 200 exhibit mechanical properties comparable to parts made with PEEK. Slow crystallization rate of this material is also a factor limiting warpage which translates into higher achievable precision and level of detail in 3D printed models. Best for printing precise, heavy duty parts that need to be exceptionally strong in all directions and work in thermally challenging environments.

Available Colors

Dedicated for Container Weight Diameter Extrusion
Zortrax Endureal spool 1000 g ±5% 1.75 mm Dual with Z-SUPPORT ATP 130
Key Properties Metric Imperial Test Method
Melting Point
303 °C 577.4 °F
ISO 11357
Tensile Strength*
70 MPa 10.15 ksi
ISO 527
Tensile Elongation*
15% 15%
ISO 527
*YZ orientation
An industrial mount 3D printed with VICTREX AM™ 200 FIL

A mount An industrial mount 3D printed with VICTREX AM™ 200 FIL


  • Heavy duty parts
  • Highly isotropic components
  • Load bearing parts
  • Structural frames