Druckwege Type D Dental Model Resin

Druckwege Type D Dental Model Resin is a precise dental resin with a gypsum-like texture. It offers very low shrinkage and high level of detail sufficient for accurate modeling of teeth and gums. The resin is available in beige color and does not release unpleasant odors. Druckwege Type D Dental Model Resin is not meant for intraoral use.

This resin is perfect for high-quality surfaces with surface inaccuracies falling below 100-150 microns. Druckwege Type D Dental Model Resin has not been classified as carcinogenic under EU legislation and IARC criteria, so it is safe to print with when used in accordance with our safety instructions.

Available Colors

Beige
Dedicated for Container Netto Weight Wavelenght
Zortrax Inkspire bottle 500 g ± 5% 405 nm
Key Properties Metric Imperial
Viscosity 33 - 57 mPa*s 0.00068922 - 0.00119047 lbf-s/ft^2
Shrinkage approx. <0.5% approx. <0.5%
Hardness Shore >80 D >80 D
E-modulus 993.00 MPa 144 ksi
Tensile Strength 30.30 MPa 4390 psi
Elongation at Break 4.6% 4.6%
Dental setup models 3D printed on Zortrax Inkspire with Druckwege Type D Dental Model Resin are used to properly adjust crowns, bridges, or other dental appliances prior to their placement in the patient's oral cavity.

A dental setup model. Dental setup models 3D printed on Zortrax Inkspire with Druckwege Type D Dental Model Resin are used to properly adjust crowns, bridges, or other dental appliances prior to their placement in the patient's oral cavity.

Applications

  • Models of teeth
  • Models of gums
  • Prototypes of dentures
  • Prototypes of crowns
  • Prototypes of bridges